Equipment index · 43 tracked · page 4 of 4

Rack & cable attachments

The right attachment can replace a machine. The wrong one becomes heavy, expensive storage.

The question that decides it: Is it compatible, quick to mount and useful enough to avoid becoming expensive wall decor?

Every rack and cable attachments product we track.

Fringe Sport

Kangaroo Cable Belt Squat

$349 (base unit); $439 with El Toro weight horns (shown against a $468 compare-at) · A PRE-ORDER on Fringe Sport's store as of Oct 15, 2026, shipping early December, with free shipping to the lower 48. The page states it plainly - "Kangaroo Cable Belt Squats are on currently on pre-order and will begin shipping early-December." (the doubled word is theirs) - alongside an "Inventory on the way" line, and the visible control reads PRE-ORDER rather than Add to Cart, carrying no disabled attribute and aria-disabled null, so it is live and orderable. Both variants confirm it in the store's own inventory data: overselling permitted with quantity at or below zero. The page's structured data contradicts all of that with schema.org/InStock on both offers; the control and the inventory data govern. Correcting this entry's own prior claim rather than overwriting it silently: it recorded that the product was in stock on Fringe Sport's store as of Oct 14, 2026. That reading came from the catalogue feed's available:true flag, which cannot distinguish real stock from permitted overselling - this is the first rendered read of the page, and it is the read that exposes the difference. Whether the product was ever actually in stock cannot be established from this index's record, so no change of state is being claimed, only a more accurate reading. Listed since June 19, 2026; an October launch roundup presented it as new, but the store record says otherwise.

A floor-level pulley foot that reroutes an existing functional trainer's cable down to a belt, so the load comes from directly below the hips the way a dedicated belt squat machine delivers it. The handlebar adjusts on the uprights like a J-cup, the included belt has three attachment positions, and a concrete anchor bolts the foot to the floor. Fringe Sport says it has been tested to 600lbs and fits 2x2, 2x3 and 3x3 setups.

Why it matters: It is the cable counterpart to Fringe Sport's own Mammoth lever-arm belt squat already in the index: a straight-line belt squat for someone who owns a half-rack functional trainer, without adding a second machine.

Watch for: The felt load follows your trainer's pulley ratio, so on a 2:1 trainer the belt squat is also 2:1 and the stack may run out quickly; the weight-horn bundle exists for that reason. Installation means cutting your cable to length (cutters are included), which is not reversible on that cable. It needs a concrete floor for the anchor. The El Toro compare-at figure is Fringe Sport's own framing, not a verified price history.

Price record · verified 6× since Oct 14

Price unchanged since Oct 14

This is a sale or promo price the page labels as such; the regular price is higher. How we track

Full record

Oct 14–Oct 18 $349 (base unit); $439 with El Toro weight horns (shown against a $468 compare-at) · stock not recorded · Released · 6 checks

Owner reviews on the brand's store (11)

11 reviews averaging 5.00★ on fringesport.com · 0% at 3★ or below

5★: 11
4★: 0
3★: 0
2★: 0
1★: 0

Every review this widget shows is 5★. That reads as moderation, not proof the product has no flaws.
A second review widget on the same page (Judge.me) shows 8 reviews averaging 4.88. The store decides which one you see.

Read 2026-10-15 from the store's Stamped review widget. The brand moderates that widget, so treat it as a curated sample. We don't republish the reviews themselves. Read them on the store ↗

Official product page →

Titan Fitness

Rack Mounted Utility Seat

$236.97 (shown as 5% off $249.99); $314.97 with the comfort pad (shown against $349.99) · Orderable on Titan's store as of Oct 14, 2026 under a limited-time offer. The store record was created Aug 6 and published Sept 8, 2026.

A steel platform with an anti-slip rubber top that quick-pins across crossmembers, uprights, flip-down safeties, spotter arms or lever arms, for step-ups, box squats, Bulgarian split squats, preacher curls and leg-press-style work. Rated to a 1,000 LB weight capacity. Fits Titan's T-3, X-3 and TITAN Series racks; an optional pad version covers prone and supine work.

Why it matters: It turns rack hardware a buyer already owns into a box, step and seat in one, which saves floor space in exactly the gyms that buy rack attachments instead of machines.

Watch for: Compatibility is published for Titan's own T-3, X-3 and TITAN Series only; fitting another brand's rack is not claimed. The discount is a limited-time offer against Titan's own list price.

Price record · verified 6× since Oct 14

Price unchanged since Oct 14

Same price on every check: no sale or drop recorded. How we track

Full record

Oct 14–Oct 18 $236.97 (shown as 5% off $249.99); $314.97 with the comfort pad (shown against $349.99) · stock not recorded · Released · 6 checks

Official product page →

Titan Fitness

Wall and Rack Mounted Pulley Tower

$251.97 Short 80.5" (shown as 20% off $314.99); $271.97 Tall 84.5" (shown against $339.99) · A long-running Titan product (listed since Oct 2023), on a limited-time 20% markdown as of Oct 14, 2026. Both heights are in stock.

A plate-loaded cable tower that mounts to a wall or to Titan's bolt-down power racks, with a 2:1 pulley ratio, 18 height settings and sleeves for standard and Olympic plates. Supports up to 350 LB.

Why it matters: It is one of the cheapest ways in the index to add lat pulldowns, rows and pushdowns with plates you already own.

Watch for: Titan says it is not compatible with X-3 Series flat-foot power racks, only bolt-down ones. At 2:1 the felt load is half the plates loaded. The markdown is labeled limited-time with no end date, and the compare-at is Titan's own list price, not a verified price history.

Price record · verified 6× since Oct 14

Price unchanged since Oct 14

Same price on every check: no sale or drop recorded. How we track

Full record

Oct 14–Oct 18 $251.97 Short 80.5" (shown as 20% off $314.99); $271.97 Tall 84.5" (shown against $339.99) · stock not recorded · Released · 6 checks

Owner reviews on the brand's store (59)

59 reviews averaging 4.75★ on titan.fitness · 0% at 3★ or below

5★: 44
4★: 15
3★: 0
2★: 0
1★: 0

The widget claims 62 reviews but only 59 are publicly visible.

Recurring owner complaints

Units arrive dinged, dented or short a fastener often enough that owners check the box before assembly4 owners
The pulley section of the assembly is under-documented, so owners find the brand video themselves2 owners

Mixed owner notes

Some cable movements need a rig or a modification the tower does not ship with, lat pulldowns and flyes especially3 owners
The plastic pulley hardware is the part owners plan to replace, and it can drag2 owners

What owners keep praising

Owners keep calling it good value for the money4 owners
Rigid and quiet once it is bolted down, with no wobble under heavy pulls3 owners

Read 2026-10-15 from the store's Reviews.io review widget. The brand moderates that widget, so treat it as a curated sample. Themes are grouped from the 10 most recent critical or mixed reviews, in owners' own words, through 2026-10-15. We don't republish the reviews themselves. Read them on the store ↗

Official product page →

PRx Performance

Ark Weight Stack Shrouds

$199.99 · In stock and buyable on PRx's own store, verified Oct 16, 2026 by rendered read. Single SKU PX6763B, one variant, with a visible enabled add-to-cart carrying no disabled attribute and no aria-disabled, a rendered line reading that it is in stock and ready to ship, and the store's own inventory data reading inventory_policy deny at a quantity of 45 — genuine stock rather than a pre-order. The product record was created and published on Oct 15, 2026. PRx publishes free shipping and a Limited Lifetime Warranty against it, and states it is made in Fargo, USA. No product-specific lead time is published; the only timing on the page is a site-wide FAQ accordion about order dispatch, which is store policy and not this product's claim.

Shrouds that enclose the weight stacks on PRx's Ark cable machine, sold in pairs. PRx describes them as designed specifically for the Ark cable machine and says they adjust with the weight stacks to keep a consistent fit as the setup changes. This index tracks that machine as the Profile PRO Ark; the shroud page uses only the Ark name, and the connection was confirmed from the trainer's own page, which carries the heading PRO Ark Weight Stack Folding Functional Trainer and links these shrouds directly.

What PRx publishes about the function is guarding language in its own words: protection against pinched fingers, snagged clothing and accidental impacts, and helping prevent fingers, clothing and other objects from getting caught between plates. It makes no statement about children, and does not use the word enclosure.

No dimensions, no weight capacity and no compatibility specification such as stack size or hole pattern are published for the part.

Why it matters: The machine this fits is one of the dearer purchases in the index, and its weight-stack guarding is a separate line item rather than part of the price. Anyone budgeting an Ark should decide on it deliberately instead of discovering it after the fact, which is exactly the kind of cost this index exists to surface before an order rather than after.

Watch for: PRx frames these as an upgrade, not as a requirement — neither the word required nor the word optional appears on the page — so the decision is yours and the brand is not making it for you. Judge it on what the copy actually describes: pinch points between moving plates on an open stack. A reading caution that applies across this brand rather than to this part: PRx parks retired prices in the compare-at field on other listings, where they can sit below the price being charged and produce a phantom saving for anything reading that field alone. On this product the compare-at is empty on both the product and the variant and nothing renders struck through, so there is no discount here and none to misread. The part is sold in pairs, so confirm whether one pair covers both stacks on your configuration before ordering.

Price record · verified 4× since Oct 16

Price unchanged since Oct 16

Same price on every check: no sale or drop recorded. How we track

Full record

Oct 16–Oct 18 $199.99 · stock not recorded · Released · 4 checks

PRx product page →

Fringe Sport

Crown Landmine & Cable Attachment

$139.00 (Short). The Long and the Short + Long bundle each cost more, but neither figure renders on the page at the default selection — both exist only in the listing's own variant data, so check the price of the length you want in the cart. · In stock and buyable on Fringe Sport's own store, verified Oct 17, 2026 by rendered read on the day after it was published. All three variants report inventory_policy deny at a quantity of 30 with inventory managed by the store, which is the pattern that distinguishes genuine stock from a pre-order rather than the orderable flag a catalogue feed exposes. The product's own purchase control is a visible ADD TO CART carrying no disabled attribute and no aria-disabled, and all three JSON-LD offers read InStock. The record was created Sept 16, 2026 and published Oct 16, 2026. Free shipping to the lower 48 is published; no lead time, dispatch window or ship estimate is published at all, and no country of manufacture is stated.

A lat-pulldown style crown bar that doubles as a landmine handle, sold in two lengths or as a pair. Both handles turn on bearings, which Fringe Sport names as the distinguishing feature: "Bearings in both handles let them spin freely through the full range of motion."

It is one part doing two jobs rather than two accessories bundled together. The centre hole is the landmine mount — Fringe Sport's copy reads "The center hole on both the Short and Long Crowns is meant for barbell landmine work" — and the same centre point takes a cable connection for articulating arms sitting close together. The Long adds connection holes at each end so it can be clipped to both cable ends of a functional trainer at once, which the Short cannot do.

The two lengths are sold as different exercises rather than different sizes. Fringe Sport's own framing: the Short keeps the grip closer together for the lower lats and mid back, and the Long opens the grip wider to bring in the outer lats for width.

Published specification, read from the expanded spec panel and FAQ: weight capacity "320lbs" on both lengths; dimensions "Short: 17" x 8.8" x 1" | Long: 36.7” x 8.8” H x 1”"; unit weights "Short: 7.7lbs | Long: 10.4lbs"; warranty "Lifetime against manufacturing defects, consistent with the rest of the Fringe Sport attachment lineup."

Why it matters: Free-spinning handles on a crown bar are the kind of detail that usually costs machine money, and this index has not previously recorded a single attachment that serves both a landmine and a cable stack from one part. For a reader who owns a functional trainer and a landmine, it replaces two purchases with one. It also lands in the middle of a lineup readers can already compare: the index already tracks Fringe Sport's Tricep Board below it and its Honeycomb Pegboard around it, both with their own entries and prices. And it publishes a weight capacity, which most attachments in this category never state at all.

Watch for: Carabiners are not included and the attachment cannot be used on a cable machine without them. Fringe Sport is explicit: "The Crown connects via standard carabiner to any cable machine, but carabiners are not included." Budget that separately, and check the gate opening on the carabiners you own against the Crown's connection points before ordering. Compatibility is carabiner-based, not rack-based. This is not a rack attachment and the page publishes no hole pattern, no upright size and no pin size — those terms return nothing. Fringe Sport names the machines it expects: any cable machine that accepts standard carabiner attachments, including its own Dane 2.0, Cloverfield, Walrus and Sidewing, and any other functional trainer or cable pulley setup. Only the Short Crown's price renders on the page. The Long and the bundle are priced in the listing's own variant data and nowhere a visitor sees at the default selection, so this index does not publish those two figures — confirm the price of the length you actually want in the cart before ordering. The bundle is the only configuration carrying a real discount, and it is small: its compare-at figure is exactly the two lengths added together, where the Short and the Long each carry a compare-at identical to their own price, which is a decorative field on this store rather than a saving. Nothing renders struck through anywhere on the page. Ignore any total shown in the page's "Frequently Bought Together" widget. On Oct 17 it read a total that was simply the Crown's own price added to a separate Tricep Board listing, which is a sum of two products rather than a bundle price for this one. No country of manufacture is published, and no lead time of any kind is stated. The three customer reviews on the page all carry publication timestamps from Oct 15, 2026, which is before the product's own publish date of Oct 16 — so they are early-access or seeded reviews rather than owner reports from buyers, and this index does not treat them as independent evidence.

Price record · verified 3× since Oct 17

Price unchanged since Oct 17

Same price on every check: no sale or drop recorded. How we track

Full record

Oct 17–Oct 18 $139.00 (Short). The Long and the Short + Long bundle each cost more, but neither figure renders on the page at the default selection — both exist only in the listing's own variant data, so check the price of the length you want in the cart. · stock not recorded · Released · 3 checks

Official product page →

Polar Bear Strength

3D Rotating Pull-Up Handles

$199.00 · Sold out on Polar Bear Strength's own store, checked Oct 18, 2026. The product page renders "Sold out" with the Black colour marked "Unavailable" and no Add to Cart control present, so the price below is what the listing asks rather than what a buyer can pay today. The page shows a regular price of $299.00 and a sale price of $199.00 with NO STATED END DATE for the sale, so which of the two is the settled list price is unresolved - $199.00 is recorded here because it is the figure the listing leads with, not because the sale is known to be permanent. A "Rotating Pull-Up Handles V2" is described elsewhere on the store as "in preparation" with no price, no product page and no date, so a buyer waiting for restock may be waiting for a different product.

A pair of rotating pull-up handles - two handles and two brackets, sold as a left and right pair - that mount to a power rack upright. The maker states an 11-gauge steel frame, an aluminium knurled grip described only as an "aggressive knurl", a powder-coated matte black finish and stainless hardware, with a stated rating of 1,000+ lb per handle. Fit is stated narrowly: "compatible with all 3"x3" power racks with 1" holes". Free shipping to the 48 contiguous US states, outbound only. Unused returns within 14 days of delivery, with a possible re-rack fee on non-defect returns.

Why it matters: A rotating pull-up handle lets the wrist and shoulder find their own path through a pull-up instead of being fixed by the bar, which is the usual reason people with cranky shoulders stop doing them. This is also the first maker in this index with a rotating handle that is actually retailed rather than announced - the one other rotating pull-up handle tracked here, JD Gym Equipped's, has never been located as a purchasable SKU and its identity is still unresolved.

Watch for: IT IS SOLD OUT, with no restock date given, and the V2 referenced on the store has no date either. Several things a buyer would want are simply not published: no dimensions (an image is labelled as dimensions but the figures are not in the page text), no grip diameter behind the "aggressive knurl" description, no product weight, no bracket size, no warranty and no dispatch or delivery timeframe. The fit claim covers 3"x3" uprights with 1" holes only - crossmember compatibility is not stated anywhere - so this does not fit most 2x3 or metric racks. Nothing here has been independently reviewed, and no owner report exists in this index.

Price record · verified 1× since Oct 18

Price unchanged since Oct 18 · Out of stock since Oct 18

Same price on every check: no sale or drop recorded. How we track

Full record

Oct 18 $199.00 · out of stock · Released · 1 check

Official product page →

The Delta Grip

The Delta Grip Cable Pulley Lateral Raise Attachment

$39.95 · $39.95 on the maker's own store, checked Oct 18, 2026, with an Add to cart control present in the product form. The price is carried in the SALE price field and the "Regular price" label beside it is EMPTY - no regular figure is published at all - so $39.95 is recorded as the asking price rather than as a discount off anything. A banner separately advertises 20% off for the first 100 "founders" applied at checkout, and the page does not say whether the $39.95 already includes it, so the price a given buyer pays at checkout may be lower. No stock count or in-stock status is published; the page states only that it "ships in 2 to 4 weeks" from New Jersey.

A single-piece cable handle with a forearm strap, intended to move lateral raises off a conventional D-handle so the load is carried against the forearm rather than gripped. The maker describes it as patent-pending and offers it in blue and black, in quantities of one or two - a pair being what lateral raises on a dual-cable station would need. Stated uses are lateral raises, chest flyes, biceps and triceps. Made to order: "ships in 2 to 4 weeks" from New Jersey, with tracking emailed on dispatch. A storefront listing gives the size as 5.75 in long x 5.00 in wide x 4.00 in tall and describes the handle as made in the USA; NEITHER the dimensions NOR the origin claim is repeated on the product page itself.

Why it matters: It is by an order of magnitude the cheapest attachment in this index, and it targets the one movement where grip is the limiting factor rather than the deltoid - which is the whole argument for a strap-based handle. A single-product US maker with a public priced storefront is also the most verifiable kind of small maker there is.

Watch for: THE PAGE PUBLISHES NO LOAD RATING AND NO MATERIALS - it says only "premium material" - which for a part that hangs on a loaded cable is the gap that matters most, and nothing here establishes what it is rated to hold. Compatibility is the second gap: it is described as clipping to cable-machine carabiners but NO compatibility list is given and no specific machine or cable system is named, with the maker advising the buyer to check that the carabiner closes fully. Dimensions, weight, manufacturing origin and warranty terms are all unstated on the product page. There is no owner report behind this entry from any source - the lead that surfaced it came from a buyer who had ordered but NOT yet received one - and no independent review exists.

Price record · verified 1× since Oct 18

Price unchanged since Oct 18

Same price on every check: no sale or drop recorded. How we track

Full record

Oct 18 $39.95 · stock not recorded · Released · 1 check

Official product page →

Showing 37–43 of 43, in catalog order.

Which way to go.

Buy for a repeated exercise

The clearest winners improve something already present in your weekly program.

Prefer tool-free changes

Fast pins, integrated storage and minimal cable rerouting make an attachment more usable.

Skip speculative compatibility

A nearly matching rack standard is not the same as manufacturer-confirmed fit.

The cost of a small shop's design is its calendar. Several of the best attachments tracked here are sold out, built to order, or shipping months after you pay — the wait is the product, not a defect.

Read the full guide →Will it fit your room? →All equipment categories →