Skip to content
Home Gym Index
Equipment

Equipment index · 44 tracked · page 1 of 4

Lower-body machines

Leg machines earn their space through biomechanics, user fit and fast setup — not by combining the most exercise names.

The question that decides it: Does the machine earn its floor space with good biomechanics, adjustability and fast client-to-client setup?

Find the closest match.

Like one already? Pick it and the rest of the 44 are ordered by what they share with it, with the differences spelled out.

Or tap Find similar on any product card below.

What actually separates them.

01 · Resistance curve

Cam shape, lever length and loading position decide where an exercise feels hardest.

02 · User fit

Check pivot alignment, pad adjustment and published height guidance.

03 · Entry and exit

Deep range is not useful if the start position is difficult or unsafe to reach.

04 · Real floor space

Add plate horns, moving levers, access paths and room to change settings.

Every lower-body machines product we track.

Glyder Belt SquatGlyder Belt Squat

Brand
ATX x Buffalo Bully Fab
Price
Price not published
Availability
Not orderable yet
Source
Official release list

Double-Sided Linear Row (LRX-750)Double-Sided Linear Row (LRX-750)

Brand
ATX
Price
$1,499
Availability
Sold out
Source
Official product page

Pandemonium SquatPandemonium Squat

Brand
Bells of Steel
Price
$1,479.99
Availability
Orderable
Source
Official Bells of Steel product page

Basilisk Leg Extension / CurlBasilisk Leg Extension / Curl

Brand
Bells of Steel
Price
$2,199.99
Availability
Pre-order
Source
Official release list

Legacy Leg Extension / Hamstring Curl MachineLegacy Leg Extension / Hamstring Curl Machine

Brand
Bells of Steel
Price
$1,349.99
Availability
Not orderable yet
Source
Official product page

Reverse Inverse Hammer 3-in-1 GHD & Nordic Curl MachineReverse Inverse Hammer 3-in-1 GHD & Nordic Curl Machine

Brand
Bells of Steel
Price
$899.99
Availability
Not orderable yet
Source
Official Bells of Steel product page

Pro Select Inner & Outer Thigh Machine (GIOT-STK)Pro Select Inner & Outer Thigh Machine (GIOT-STK)

Brand
Body-Solid
Price
$2,255
Availability
Orderable
Source
Official product page

Twin Pen-Dulum SquatTwin Pen-Dulum Squat

Brand
Chisel Fit
Price
$5,995
Availability
Orderable
Source
Official release list

3-in-1 Leg Extension & Curl + Prone Leg Curl Combo3-in-1 Leg Extension & Curl + Prone Leg Curl Combo

Brand
Echo Strength
Price
$2,159
Availability
Not orderable yet
Source
Official product page

Ridgeline Abductor / Adductor MachineRidgeline Abductor / Adductor Machine

Brand
Force USA
Price
$2,799
Availability
Not orderable yet
Source
Official Force USA product page

Manufacturer-published specifications and show-floor coverage, verified per product — see individual source links.

ATX x Buffalo Bully Fab2 on this page

ATX x Buffalo Bully Fab Glyder Belt Squat
Announced

ATX x Buffalo Bully Fab

Glyder Belt Squat

Price not published

Not available to order yet. Last checked Sep 28.

A compact plate-loaded belt squat using a guided gliding mechanism to deliver a consistent path with reduced spinal loading.

Find similar

Price record · verified 5× since Sep 9

Full record
  1. Sep 9–Sep 28 no price published · stock not recorded · Announced · 5 checks
Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on September 28, 2026.

What the maker publishes

A compact plate-loaded belt squat using a guided gliding mechanism to deliver a consistent path with reduced spinal loading.

Why the index tracks it

A good belt squat is highly relevant to hard leg training, aging athletes and coaching around axial-load tolerance.

Open questions and caveats

Starting resistance, depth, belt path, loading access, price and whether the glide feels natural across different body sizes.

Availability notes

Expected Q4 2026; not yet on ATX's coming-soon page as of Aug 2026

Source: Official release list

ATX Double-Sided Linear Row (LRX-750)
Released

ATX

Double-Sided Linear Row (LRX-750)

$1,499

Sold out. Last checked Nov 17.

Commercial-grade linear-bearing row machine built for both bent-over and chest-supported rows, with a free-rotating chest pad and a two-sided layout for facing either direction.

ATX page ↗Find similar

Price record · verified 15× since Aug 20

Price unchanged since Aug 20 · Out of stock since Oct 5

Same price on every check: no sale or drop recorded. How we track

Full record
  1. Oct 5–Nov 17 $1,499.00 · out of stock · Released · 9 checks
  2. Sep 28 $1,499.00 · stock not recorded · Released · 1 check
  3. Sep 4–Sep 21 $1,499.00 · pre-order · Released · 4 checks
  4. Aug 20 $1,499.00 · stock not recorded · Released · 1 check
Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on November 17, 2026.

What the maker publishes

Commercial-grade linear-bearing row machine built for both bent-over and chest-supported rows, with a free-rotating chest pad and a two-sided layout for facing either direction.

Why the index tracks it

The free-rotating chest pad follows the body through the row instead of pinning it, taking pressure off the sternum and letting the lats stretch fully at the bottom of the movement — reviewers rate the bearing smoothness among the best they have tested.

Open questions and caveats

Confirm footprint and loading clearance for a two-sided commercial row before ordering — this is a larger, heavier machine than a typical home-gym row attachment.

Availability notes

Out of stock on ATX's US store at $1,499.00, verified Oct 5, 2026. The price held; availability did not. All three signals agree: no add-to-cart control exists on the page at all, the visible control in its place is an enabled "NOTIFY ME" button, the single JSON-LD Product (sku ATX-LRX-750) publishes schema.org/OutOfStock, and the page renders both a visible "Out of stock" and a screen-reader "Stock status: Out of stock". No back-in-stock date is published. This reverses the in-stock, orderable state recorded Sept 21 and Sept 28, 2026.

Source: Official product page

Bells of Steel4 on this page

Bells of Steel Pandemonium Squat
Released

Bells of Steel

Pandemonium Squat

$1,479.99Sale price on the maker's page

Available to order. Last checked Nov 22.

A counterbalanced pendulum squat that doubles as a calf press and Viking press, for lifters short on floor space.

Main compromise: Sharing one frame between squat and press geometry means trade-offs, so weigh footplate size, changeover time and stability.

Full cost: Marked down from a regular price of $1,749.99.

Bells of Steel page ↗Find similar

Price record · verified 51× since Sep 2

↓ $270 on Nov 5 (was $1,749.99)

A sale or promo, not a list-price cut: the page still shows a higher regular price. How we track

Sep 2–Nov 4: $1,749.99 · stock not recordedNov 5–Nov 22: $1,479.99 · stock not recorded
Sep 2 · low $1,479.99 · high $1,749.99Nov 22
Full record
  1. Nov 5–Nov 22 $1,479.99 (sale; $1,749.99 regular) · stock not recorded · Released · 14 checks
  2. Sep 2–Nov 4 $1,749.99 · stock not recorded · Released · 37 checks
Owner reviews on the brand's store (8)

8 reviews averaging 5.00★ on bellsofsteel.us · 0% at 3★ or below

5★
8
4★
0
3★
0
2★
0
1★
0
  • Every review this widget shows is 5★. That reads as moderation, not proof the product has no flaws.
  • 38% are marked as incentivized reviews by the store's own widget.
  • The brand posted a reply on 100% of these reviews.

Read 2026-11-16 from the store's Okendo review widget. The brand moderates that widget, so treat it as a curated sample. We don't republish the reviews themselves. Read them on the store ↗

Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on November 22, 2026.

What the maker publishes

Counterbalanced pendulum squat sold as a 3-in-1 pendulum squat, calf press and Viking press machine, also supporting dips, pull-ups and rows in a residential footprint.

Why the index tracks it

It tries to make a desirable bodybuilding machine earn more of the floor space it consumes.

Open questions and caveats

Compromise between squat and press geometry, footplate size, transition time and stability during non-squat exercises.

Availability notes

Live on Bells of Steel's US store at $1,749.99 and in stock as of Sept 14, 2026, with Add to Cart visible and enabled; the page quotes 1-3 business day shipping.

Source: Official Bells of Steel product page

Bells of Steel Basilisk Leg Extension / Curl
Released

Bells of Steel

Basilisk Leg Extension / Curl

$2,199.99Sale price on the maker's page

Restock pre-order; Bells of Steel says all three options ship by March 31, 2027. Last checked Nov 22.

A compact selectorized leg extension and seated curl for home gyms, sized for users 5 ft 3 in to 6 ft 2 in.

Main compromise: Cables, upholstery and pulleys carry only a 90-day warranty, against a limited lifetime warranty on the frame and welds.

Full cost: The 310 lb stack is $2,899.99 and a 100 lb upgrade kit is $534.99; the sale is only known to apply to the 210 lb stack.

Price covers: 210 lb weight stack, marked down from $2,599.99.

Bells of Steel page ↗Find similar

Price record · verified 50× since Aug 23

↓ $400 on Nov 5 (was $2,599.99)

A sale or promo, not a list-price cut: the page still shows a higher regular price. How we track

Aug 23: CA$2,799.99 · stock not recordedSep 7: $2,599.99 · stock not recordedSep 17–Nov 4: $2,599.99 · stock not recordedNov 5–Nov 22: $2,199.99 · stock not recorded
Aug 23 · low $2,199.99 · high $2,599.99Nov 22
Full record
  1. Nov 5–Nov 22 $2,199.99 (sale; $2,599.99 regular) for the 210 lb stack; $2,899.99 (310 lb stack) and $534.99 (100 lb upgrade kit) as last read Nov 4, 2026 — the markdown is confirmed only on the 210 lb configuration · stock not recorded · Released · 14 checks
  2. Sep 17–Nov 4 $2,599.99 (210 lb stack) / $2,899.99 (310 lb stack) / $534.99 (100 lb upgrade kit) · stock not recorded · Released · 34 checks
  3. Sep 7 $2,599.99 · stock not recorded · Announced · 1 check
  4. Aug 23 $2,799.99 CAD · stock not recorded · Announced · 1 check
Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on November 22, 2026.

What the maker publishes

Compact selectorized 2-in-1 with a tuned cam, reversible stack side, aluminum pulleys and 60-mm attachment compatibility. Bells of Steel publishes a 210 lb or 310 lb weight stack with a 100 lb upgrade kit, a 40% seat slope, a fit range of 5 ft 3 in to 6 ft 2 in, and dimensions of 5.75 ft tall by 3 ft wide by 4.9 ft deep.

Why the index tracks it

It is designed around home-gym dimensions without pretending that a poor resistance curve is acceptable in a combo machine.

Open questions and caveats

The two stacks are no longer separated by delivery date: as of Oct 3, 2026 both stacks and the upgrade kit are quoted by the same March 31, 2027 restock date, so the stack choice is now a capacity and budget decision rather than a schedule one. If you were choosing the 210 lb to get it sooner, that reason no longer applies. The “From $534.99 USD” figure in Bells of Steel’s search grid, previously unattributed, is the 100 lb upgrade kit (SKU STK-LELC-UPGR-SET), not a machine price; budget against $2,599.99 or $2,899.99. Warranty is Limited Lifetime on frame and welds but only 90 days on cables, upholstery and pulleys. Actual seated-curl setup, adjustment speed between users and delivered condition still unverified.

Availability notes

All three configurations are presale as of Oct 3, 2026. Read at their own ?variant= URLs with the checked radio and hidden input[name=“id”] asserted in the same execution, the 210 lb stack ($2,599.99), the 310 lb stack ($2,899.99) and the 100 lb upgrade kit ($534.99, SKU STK-LELC-UPGR-SET) each render the same purchase button, “RE-STOCK - SHIPS BY MARCH 31, 2027”, and each lists “Pickup currently unavailable at Indianapolis Showroom Pick Up”. This is a change for the 210 lb configuration, which on Sept 17, 2026 had an enabled Add to Cart and Indianapolis showroom pickup usually ready in 2-4 days. The 310 lb date itself has not moved. All three still report schema.org/InStock, which contradicts the presale buttons — the buttons govern.

Source: Official release list · Price checked on the maker's page

Bells of Steel Legacy Leg Extension / Hamstring Curl Machine
Coming soon

Bells of Steel

Legacy Leg Extension / Hamstring Curl Machine

$1,349.99

Not available to order yet. Last checked Nov 1.

A plate-loaded leg extension that converts to prone or seated hamstring curls on one frame, so it covers all three movements.

Bells of Steel page ↗Find similar

Price record · verified 1× since Nov 1

Price unchanged since Nov 1

Same price on every check: no sale or drop recorded. How we track

Full record
  1. Nov 1 $1,349.99 (machine only; $1,499.99 with the Preacher Curl Attachment) · stock not recorded · Coming soon · 1 check
Owner reviews on the brand's store (6)

6 reviews averaging 5.00★ on bellsofsteel.us · 0% at 3★ or below

5★
6
4★
0
3★
0
2★
0
1★
0
  • Every review this widget shows is 5★. That reads as moderation, not proof the product has no flaws.
  • 50% are marked as incentivized reviews by the store's own widget.
  • The brand posted a reply on 100% of these reviews.

Read 2026-11-17 from the store's Okendo review widget. The brand moderates that widget, so treat it as a curated sample. We don't republish the reviews themselves. Read them on the store ↗

Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on November 1, 2026.

What the maker publishes

A plate-loaded leg extension that converts to prone or seated hamstring curls on one frame, so it covers all three movements. The brand's headline feature is a patent-pending toggle it says removes the dead zone at the start of the movement. Five adjustment points, six seat angles and six back pad angles; double-thick leg rollers; numbered settings; Olympic plate pegs with collars; a toggle lockout and safety stopper, with an optional bolt-down plate. Spec table: 180 lb machine weight, 350 lb max capacity; warranty 1 Year (Pads) / 3 Years (Moving Parts) / Limited Lifetime (Frame). An optional preacher curl attachment adds biceps work through a cable handle (handle not included).

Why the index tracks it

A true 3-in-1 (extension, seated curl, prone curl) at a plate-loaded price from a brand the index already tracks, which makes it the natural price anchor for leg extension/curl combos in this file.

Open questions and caveats

It is a pre-order with a stated ship-by date of December 16, 2026, not stock on hand. The no-dead-zone toggle is the brand's claim and is patent-pending; no owner has reported on it in this index yet. Plate-loaded means the felt resistance depends on the lever, not the plate total.

Availability notes

Pre-order on Bells of Steel's US store, read Nov 1, 2026 by a gated static fetch: the product title on the page reads “Legacy Leg Extension / Hamstring Curl Machine - Plate Loaded - Ships By December 16, 2026”. The store's product data reports all three variants available. A flash-sale widget on the page reads "This flash is done", so no sale figure applies. Not checked: the Add to cart control's state after hydration.

Source: Official product page

Bells of Steel Reverse Inverse Hammer 3-in-1 GHD & Nordic Curl Machine
Coming soon

Bells of Steel

Reverse Inverse Hammer 3-in-1 GHD & Nordic Curl Machine

$899.99Sale price on the maker's page

Not available to order yet. Last checked Nov 20.

A plate-loaded posterior-chain machine that combines a reverse back extension, a glute-ham developer and a Nordic curl station, sold in five configurations from the back extension alone up to the complete 3-in-1.

Bells of Steel page ↗Find similar

Price record · verified 2× since Nov 18

↓ $100 on Nov 20 (was $999.99)

A sale or promo, not a list-price cut: the page still shows a higher regular price. How we track

Nov 18: $999.99 · stock not recordedNov 20: $899.99 · stock not recorded
Nov 18 · low $899.99 · high $999.99Nov 20
Full record
  1. Nov 20 $899.99 (sale; $999.99 regular) for the Reverse Back Extension only to $1,979.99 (sale; $2,199.99 regular) for the Complete 3-in-1; GHD only is $1,394.99 (sale; $1,549.99 regular), GHD + Assist Arm $1,844.99 (sale; $2,049.99 regular), Reverse Hammer 2-in-1 $1,529.99 (sale; $1,699.99 regular) · stock not recorded · Coming soon · 1 check
  2. Nov 18 $999.99 (Reverse Back Extension only) to $2,199.99 (Complete 3-in-1); GHD only is $1,549.99 · stock not recorded · Sold out · 1 check
Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on November 20, 2026.

What the maker publishes

A plate-loaded posterior-chain machine that combines a reverse back extension, a glute-ham developer and a Nordic curl station, sold in five configurations from the back extension alone up to the complete 3-in-1. Bells of Steel publishes a 500 lb weight capacity and a footprint of 73.2 x 46 inches.

Why the index tracks it

It folds three posterior-chain stations into one footprint, the space-saving pitch most home gyms need for these movements.

Open questions and caveats

This is a pre-order: you pay today for a machine the page says ships by Apr 30, with no year printed beside the date. All five prices are markdowns against struck figures and no end date for the discount is published, so the price may rise before you order. The page prints two slightly different footprint lengths in different places; measure against the larger. Configuration names differ a lot in what they include, so check which one a quoted price refers to.

Availability notes

Published on Bells of Steel's US store on Nov 17, 2026 and listed sold out on Nov 18 with a Notify Me button and no date. Read again Nov 20, 2026 by rendered read: every configuration now shows an enabled Pre-Order button, the page says it ships by Apr 30 and that the card is charged today, orders ship in order of purchase and can be cancelled before shipping, and the structured data reports InStock on all five offers. The page calls it new equipment, shows it as seen at Home Gym Con 2026, and says it replaces the original 2-in-1 Reverse Hammer.

Source: Official Bells of Steel product page

Body-Solid Pro Select Inner & Outer Thigh Machine (GIOT-STK)
Released

Body-Solid

Pro Select Inner & Outer Thigh Machine (GIOT-STK)

$2,255Sale price on the maker's page

Available to order. Last checked Nov 17.

Selectorized abduction and adduction from one seated position, with what Body-Solid calls a "no cable change design" between the two movements.

Body-Solid page ↗Find similar

Price record · verified 19× since Sep 16

↓ $640 on Nov 7 (was $2,895)

A sale or promo, not a list-price cut: the page still shows a higher regular price. How we track

Sep 16–Oct 4: $2,895 · stock not recordedOct 7: $2,029.50 · stock not recordedOct 9–Nov 6: $2,895 · stock not recordedNov 7–Nov 17: $2,255 · stock not recorded
Sep 16 · low $2,029.50 · high $2,895Nov 17
Full record
  1. Nov 7–Nov 17 $2,255.00 - $2,490.00 (sale; $2,895.00 - $3,125.00 MSRP) — 210 lb stack $2,255.00 (MSRP $2,895.00) / 310 lb stack $2,490.00 (MSRP $3,125.00) · stock not recorded · Released · 3 checks
  2. Oct 9–Nov 6 $2,895.00 - $3,125.00 (210 lb stack $2,895.00 / 310 lb stack $3,125.00) · stock not recorded · Released · 12 checks
  3. Oct 7 $2,029.50 - $2,241.00 (sale; MSRP $2,895.00 - $3,125.00) · stock not recorded · Released · 1 check
  4. Sep 16–Oct 4 $2,895.00 - $3,125.00 · stock not recorded · Released · 3 checks
Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on November 17, 2026.

What the maker publishes

Selectorized abduction and adduction from one seated position, with what Body-Solid calls a "no cable change design" between the two movements. Priced $2,895.00 with the included 210-lb stack and $3,125.00 with the optional 310-lb stack — the heavier stack is sold as a separate configuration total, not as a labelled surcharge. Published footprint 63.00" L x 65.00" W x 71.00" H at an assembled weight of 411 lb. Body-Solid states "5 range of motion adjustments accommodate users of all sizes," plus a lumbar supported adjustable back pad and swiveling knee pads.

Why the index tracks it

The index has carried no abductor or adductor machine of any kind, while hip abduction and adduction are among the hardest movements to load meaningfully at home without a dedicated station. The published footprint is the decision-relevant part: at 63 x 65 inches this needs roughly 5.25 x 5.4 feet of clear floor, so it does not fit the 4 x 6 foot slot buyers most often try to squeeze a single-purpose machine into, and that is before leaving room to get on and off it.

Open questions and caveats

Body-Solid publishes no frame gauge or tubing size for this machine ("gauge" and "tubing" each appear zero times) and no recline angle for the back pad despite marketing its adjustability, so the two specs that most separate machines in this class are both unstated. Warranty is linked rather than stated — there are no coverage terms on the page itself. No shipping terms are published either, and the page's own Package Dimensions / Volume / Gross Weight table renders with every cell empty, so freight for a 411-lb machine cannot be estimated from it. The standard 210-lb stack is under 100 kg, which is the ceiling buyers of this machine class most often outgrow first; the $230 step up to the 310-lb stack is worth pricing against that before ordering.

Availability notes

Buyable in both weight stacks, re-verified Nov 7, 2026 with the add-to-cart control read by id on a settled, scrolled page and the actually-checked radio asserted in the same execution as each price: microdata InStock twice over in both stacks, cart enabled, ADD TO GUEST QUOTE enabled. ON THE CATALOGUE-WIDE BODY-SOLID SALE AS OF NOV 7, 2026, MSRP against sale price: 210 lb stack (SKU GIOT-STK/2) $2,895.00 against $2,255.00; 310 lb stack (GIOT-STK/3) $3,125.00 against $2,490.00. Both MSRPs match the figures this entry already recorded, so the list prices have not moved. A pristine load still renders the range with neither radio pre-checked, and under the sale it renders both bands: an MSRP range of $2,895.00 to $3,125.00 above a sale range of $2,255.00 to $2,490.00. The pristine SKU node reads GIOT-ST, which is not a selectable variant SKU — the two real stacks are GIOT-STK/2 and GIOT-STK/3.

Source: Official product page

Chisel Fit Twin Pen-Dulum Squat
Released

Chisel Fit

Twin Pen-Dulum Squat

$5,995

Available to order. Last checked Nov 22.

Linked pendulum back pad and footplate move together, starting like a hack squat and finishing closer to a free squat.

Chisel Fit page ↗Find similar

Price record · verified 48× since Sep 10

↑ $2,000 on Nov 3 (was $3,995)

A sale ending: the regular price is back, not a price increase. How we track

Sep 10: no price · stock not recordedOct 1–Nov 2: $3,995 · stock not recordedNov 3–Nov 22: $5,995 · stock not recorded
Sep 10 · low $3,995 · high $5,995Nov 22
Full record
  1. Nov 3–Nov 22 $5,995.00 · stock not recorded · Released · 16 checks
  2. Oct 1–Nov 2 $3,995.00 (pre-order; $5,995.00 regular) · stock not recorded · Released · 31 checks
  3. Sep 10 no price published · stock not recorded · Prototype · 1 check
Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on November 22, 2026.

What the maker publishes

Linked pendulum back pad and footplate move together, starting like a hack squat and finishing closer to a free squat.

Why the index tracks it

It explores a genuinely different squat path rather than combining familiar machines in a new frame.

Open questions and caveats

Whether January 2027 holds any better than December 2026 did, and whether the pre-order discount returns; the page preserves no price history, so neither can be read off it. Do not carry across the deposit terms that also render on this page: "Pre-Order The Chisel Fit Rower and save $1,000 - simply reserve your unit with a $500 deposit" belongs to the rower's sitewide banner and announcement bar, and the Twin Pen-Dulum is a straight add-to-cart with no deposit mechanism published anywhere. A stale "limited time" free-shipping line still sits inside a collapsed accordion on this page, so it does not render until the accordion is opened — it is a shipping offer and old pre-order language, never a price discount. The page also contradicts itself on warranty: the body copy promises a ten-year structural frame warranty while the Warranty Protection accordion on the same page states seven years for the structural frame. Do not publish either figure as the warranty until the brand resolves it. Naming: the brand's own spelling is "Twin Pen-Dulum Squat", and its copy also shortens it to "TWIN-PEN". The machine is still absent from HomeGymCon's new-product-releases page, so the brand page is now the only live source.

Availability notes

Orderable on Chisel Fit's own store, re-read Nov 3, 2026 at $5,995.00 with a visible enabled Add to Cart (no disabled attribute, aria-disabled null) and schema.org/InStock. The pre-order discount this entry recorded on Oct 1 is over: the $3,995.00 figure and the "$2,000 Off" line are both absent from the rendered text and from the raw markup, compare_at_price is null on every match, and not one line-through node containing a currency symbol exists anywhere in the document. The product block now reads "Order Today and receive FREE Shipping", and the fulfillment sentence beside it names January 2027 — one month later than the December 2026 window the page previously stated. Schema reporting InStock beside a stated future fulfillment month is a convention, not stock on hand.

Source: Official release list · Price checked on the maker's page

Echo Strength 3-in-1 Leg Extension & Curl + Prone Leg Curl Combo
Coming soon

Echo Strength

3-in-1 Leg Extension & Curl + Prone Leg Curl Combo

$2,159

Not available to order yet. Last checked Nov 1.

A selectorized (weight-stack, not plate-loaded) leg station covering leg extension, seated leg curl, prone leg curl and hip thrust, with a 180° pivoting lap bar for the seated-to-prone switch. 3" x 3" 12-gauge…

Echo Strength page ↗Find similar

Price record · verified 1× since Nov 1

Price unchanged since Nov 1

Same price on every check: no sale or drop recorded. How we track

Full record
  1. Nov 1 $2,159.00 (220 lb stack; $2,599.00 with the 300 lb stack) · stock not recorded · Coming soon · 1 check
Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on November 1, 2026.

What the maker publishes

A selectorized (weight-stack, not plate-loaded) leg station covering leg extension, seated leg curl, prone leg curl and hip thrust, with a 180° pivoting lap bar for the seated-to-prone switch. 3" x 3" 12-gauge steel with 1" laser-cut holes. Stated footprint at max extension 69" L x 65" W x 64" H. Not included in the brand's Classic Selectorized Package Deals.

Why the index tracks it

The only selectorized 3-in-1 in this batch, and it adds a hip-thrust position.

Open questions and caveats

A 6-8 week pre-order, and the $2,799.00 regular price frames a sale whose end is not stated. The page also advertises an extra 15% off with code SAVE15, which none of the figures here include; confirm in the cart whether it applies.

Availability notes

Pre-order on Echo Strength Depot's own store, read Nov 1, 2026: the product title reads "(Pre-order 6-8 Weeks)". A rendered browser read the same day, taken twice about thirty seconds apart and with each stack selected by its own variant URL, found the Add to cart controls visible and enabled for both the 220 lb and 300 lb stacks and the structured data reading InStock; each stack shows a $2,799.00 regular price beside its sale price. One page-reading trap: each stack's label carries the text "Variant sold out or unavailable", but it is a visually hidden 1-pixel accessibility label from the theme template, not shown to a buyer, and neither option is disabled.

Source: Official product page

Force USA3 on this page

Force USA Ridgeline Abductor / Adductor Machine
Coming soon

Force USA

Ridgeline Abductor / Adductor Machine

$2,799

Not available to order yet. Last checked Nov 3.

Pin-loaded, with resistance published as up to 264 lb (120 kg).

Force USA page ↗Find similar

Price record · verified 1× since Nov 3

Price unchanged since Nov 3

Same price on every check: no sale or drop recorded. How we track

Full record
  1. Nov 3 $2,799 · stock not recorded · Coming soon · 1 check
Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on November 3, 2026.

What the maker publishes

One of four machines in Force USA's Ridgeline line, all published the same day and all sharing the F-R- SKU prefix. SKU F-R-AAOIT. Pin-loaded, with resistance published as up to 264 lb (120 kg). Rated to a 396 lb (180 kg) maximum user weight, built from high-tensile steel with a corrosion-resistant powder coating, and listed by Force USA for full commercial use. Force USA publishes no footprint or assembled dimensions for this machine.

Why the index tracks it

The index tracks four Force USA products and not one of them is a selectorized machine, so this line is new ground for a brand buyers already shortlist for racks and benches. Pin-loaded single-station machines at this price sit between home-grade plate-loaded attachments and commercial-gym equipment, which is exactly the band a serious home gym reaches last.

Open questions and caveats

THIS IS THE ONE MACHINE IN THE LINE WITH NO PUBLISHED FOOTPRINT. Its three siblings all publish overall dimensions and this one does not, re-tested case-insensitively; for a single-station machine in a garage that is the figure a buyer needs most, so ask Force USA before planning a layout. NO DATE OF ANY KIND IS PUBLISHED, AND THAT IS THE GAP. The page states only, verbatim, "This Force USA Ridgeline machine is coming soon. Enter your email to be notified when it is available." There is no quarter, no year, no pre-order, no waitlist position and no lead time anywhere in the product text, tested case-insensitively and across hyphen, en-dash and em-dash variants. So treat the timing as unstated rather than near. Two attribution traps on this template, both cleared on the read: the shipping policy modal promising despatch within two weeks is a store-wide policy and NOT a Ridgeline lead time, and the other currency figures on the page sit in the "customers also viewed" carousel and belong to other machines. A hidden block reading "Retail Exclusive" also exists in the template and is NOT the active state, so do not report these as retail-only. The NOTIFY ME control is enabled, but it captures an email address rather than an order, so its enabled state is not a purchase signal. Zero reviews and no dated review anywhere, so there is no age evidence for this record beyond its catalogue publication date.

Availability notes

Published to Force USA's own catalogue on Nov 2, 2026 and read on the rendered page Nov 3: priced but NOT orderable. There is no add-to-cart control on the page at all, visible or hidden — the only purchase-adjacent control is an enabled NOTIFY ME button inside an out-of-stock email-capture form — and the structured data publishes schema.org/OutOfStock. The compare-at element exists in the template but is empty, so there is no struck figure and no discount. The page was read twice around half a minute apart and the control never relabelled itself.

Source: Official Force USA product page

Force USA Ridgeline Bicep / Tricep Machine
Coming soon

Force USA

Ridgeline Bicep / Tricep Machine

$2,899

Not available to order yet. Last checked Nov 3.

Pin-loaded, with resistance published as up to 264 lb (120 kg).

Force USA page ↗Find similar

Price record · verified 1× since Nov 3

Price unchanged since Nov 3

Same price on every check: no sale or drop recorded. How we track

Full record
  1. Nov 3 $2,899 · stock not recorded · Coming soon · 1 check
Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on November 3, 2026.

What the maker publishes

One of four machines in Force USA's Ridgeline line, all published the same day and all sharing the F-R- SKU prefix. SKU F-R-BT. Pin-loaded, with resistance published as up to 264 lb (120 kg). Rated to a 396 lb (180 kg) maximum user weight, built from high-tensile steel with a corrosion-resistant powder coating, and listed by Force USA for full commercial use. Published dimensions are 50 x 41.7 x 64.6 in (127 x 106 x 164 cm), length by width by height.

Why the index tracks it

The index tracks four Force USA products and not one of them is a selectorized machine, so this line is new ground for a brand buyers already shortlist for racks and benches. Pin-loaded single-station machines at this price sit between home-grade plate-loaded attachments and commercial-gym equipment, which is exactly the band a serious home gym reaches last.

Open questions and caveats

NO DATE OF ANY KIND IS PUBLISHED, AND THAT IS THE GAP. The page states only, verbatim, "This Force USA Ridgeline machine is coming soon. Enter your email to be notified when it is available." There is no quarter, no year, no pre-order, no waitlist position and no lead time anywhere in the product text, tested case-insensitively and across hyphen, en-dash and em-dash variants. So treat the timing as unstated rather than near. Two attribution traps on this template, both cleared on the read: the shipping policy modal promising despatch within two weeks is a store-wide policy and NOT a Ridgeline lead time, and the other currency figures on the page sit in the "customers also viewed" carousel and belong to other machines. A hidden block reading "Retail Exclusive" also exists in the template and is NOT the active state, so do not report these as retail-only. The NOTIFY ME control is enabled, but it captures an email address rather than an order, so its enabled state is not a purchase signal. Zero reviews and no dated review anywhere, so there is no age evidence for this record beyond its catalogue publication date.

Availability notes

Published to Force USA's own catalogue on Nov 2, 2026 and read on the rendered page Nov 3: priced but NOT orderable. There is no add-to-cart control on the page at all, visible or hidden — the only purchase-adjacent control is an enabled NOTIFY ME button inside an out-of-stock email-capture form — and the structured data publishes schema.org/OutOfStock. The compare-at element exists in the template but is empty, so there is no struck figure and no discount. The page was read twice around half a minute apart and the control never relabelled itself.

Source: Official Force USA product page

Force USA Ridgeline Leg Extension / Leg Curl Machine
Coming soon

Force USA

Ridgeline Leg Extension / Leg Curl Machine

$2,899

Not available to order yet. Last checked Nov 3.

Pin-loaded, with resistance published as up to 264 lb (120 kg).

Force USA page ↗Find similar

Price record · verified 1× since Nov 3

Price unchanged since Nov 3

Same price on every check: no sale or drop recorded. How we track

Full record
  1. Nov 3 $2,899 · stock not recorded · Coming soon · 1 check
Verification record

The full notes behind this entry: what the maker's page said, and how each price, stock state and claim was checked, most recently on November 3, 2026.

What the maker publishes

One of four machines in Force USA's Ridgeline line, all published the same day and all sharing the F-R- SKU prefix. SKU F-R-LELC. Pin-loaded, with resistance published as up to 264 lb (120 kg). Rated to a 396 lb (180 kg) maximum user weight, built from high-tensile steel with a corrosion-resistant powder coating, and listed by Force USA for full commercial use. Published dimensions are 50.6 x 35.8 x 56.3 in (128.5 x 91 x 143 cm), length by width by height.

Why the index tracks it

The index tracks four Force USA products and not one of them is a selectorized machine, so this line is new ground for a brand buyers already shortlist for racks and benches. Pin-loaded single-station machines at this price sit between home-grade plate-loaded attachments and commercial-gym equipment, which is exactly the band a serious home gym reaches last.

Open questions and caveats

NAMING: this machine's heading and structured data omit the "Force USA" prefix its three siblings carry. That is a vendor inconsistency on one record, not a different brand. NO DATE OF ANY KIND IS PUBLISHED, AND THAT IS THE GAP. The page states only, verbatim, "This Force USA Ridgeline machine is coming soon. Enter your email to be notified when it is available." There is no quarter, no year, no pre-order, no waitlist position and no lead time anywhere in the product text, tested case-insensitively and across hyphen, en-dash and em-dash variants. So treat the timing as unstated rather than near. Two attribution traps on this template, both cleared on the read: the shipping policy modal promising despatch within two weeks is a store-wide policy and NOT a Ridgeline lead time, and the other currency figures on the page sit in the "customers also viewed" carousel and belong to other machines. A hidden block reading "Retail Exclusive" also exists in the template and is NOT the active state, so do not report these as retail-only. The NOTIFY ME control is enabled, but it captures an email address rather than an order, so its enabled state is not a purchase signal. Zero reviews and no dated review anywhere, so there is no age evidence for this record beyond its catalogue publication date.

Availability notes

Published to Force USA's own catalogue on Nov 2, 2026 and read on the rendered page Nov 3: priced but NOT orderable. There is no add-to-cart control on the page at all, visible or hidden — the only purchase-adjacent control is an enabled NOTIFY ME button inside an out-of-stock email-capture form — and the structured data publishes schema.org/OutOfStock. The compare-at element exists in the template but is empty, so there is no struck figure and no discount. The page was read twice around half a minute apart and the control never relabelled itself.

Source: Official Force USA product page

Showing 1–12 of 44, grouped by brand.

While you decide

Lower-body machines move fast. Your shortlist shouldn't go stale.

New models, price moves and status flips across the index land in an occasional email, so when you're ready to buy, you're deciding on current information, not last month's.

No paid placements. No sold lists. Unsubscribe in one click.

Which way to go.

Choose selectorized

Best for fast weight changes, shared gyms and frequent leg-extension or curl work.

Choose plate-loaded

Best when budget matters and you already own enough plates.

Choose a combo machine

Best only when both movements feel good; do not accept two compromised stations to save space.