Skip to content
Home Gym Index
The Floor

The Floor · Wire archive · Page 11 of 12

The Wire

Older entries, 2026-08-23 to 2026-09-08. Each entry is dated and links its sources; nothing is backfilled. For this week's news, start at The Floor.

Tuesday, September 8, 2026

2 months ago
Adjustable Bench 4.0
DropRogue

Rogue's Adjustable Bench 4.0 is live at $695, shipping in 7-10 days

Rogue has added the Adjustable Bench 4.0 to its new-gear page at $695.00, listed as "Ships in 7-10 Days" — it is orderable now, not a preorder. The official page states 10 back positions from 0 to 85 degrees and 4 seat positions at -15, 0, 15 and 30 degrees, on a 3x3-inch 11-gauge frame, with a 12-inch-wide by 52-inch USA textured foam pad, a 130 lb bench weight and a built-in vertical storage stand. Note what the numbers do and do not say: the back pad's lowest setting is flat, so the decline comes from the -15 degree seat alone, the same seat-only arrangement REP uses on the Nighthawk rather than a true decline back pad. Rogue publishes no weight rating on the page, so if a capacity figure matters to you it is not yet documented.

Monday, September 7, 2026

2 months ago
DropSpeediance

Speediance's Gym Monster Ultra reaches retail as a two-payment preorder — $399 down, $6,100 later

The Gym Monster Ultra now has a product page on Speediance's own store, titled "Speediance Gym Monster Ultra (Pre-Order)". It is sold in two payments: $399.00 up front and a "$6,100LATER" balance, which Speediance says it expects to invite customers to pay in October 2026, with the caveat that "the exact timing may be adjusted due to production, inventory, or logistics conditions." The two stated payments total $6,499, and the page advertises an "$899OFF" preorder coupon without publishing a plain list price to measure it against. The first batch is already gone — the buy button reads "Sold out." Separately, a Gym Monster 3 page has appeared at $4,099.00 (220 lb of resistance, 260 lb on the 3S, direct-drive motors, a 23.8-inch touchscreen and a stated footprint under 9 sq ft); its stock state could not be read reliably, so we are not claiming one. Until we tracked it today the Ultra existed only as a HomeGymCon show listing, and it was confirmed absent from Speediance's catalog as recently as August 19.

Price changeBells of Steel

Bells of Steel's Basilisk leg extension/curl gets a US price of $2,599.99 — but you still can't order one

The Basilisk stack-loaded leg extension / leg curl now has a live page on Bells of Steel's US store at $2,599.99, badged "New arrival." Until today we could only price it at $2,799.99 CAD from the Canadian store, so this is the first US figure. It is not buyable: the purchase control is disabled and reads "Unavailable," even though a generic "Ships in 1-3 business days" line appears elsewhere on the same page — treat the disabled button as the real answer, not the shipping boilerplate. Bells of Steel now publishes the configuration too: a 210 lb or 310 lb weight stack plus a 100 lb upgrade kit, a 40% seat slope, a fit range of 5 ft 3 in to 6 ft 2 in, and a footprint of 5.75 ft tall by 3 ft wide by 4.9 ft deep. One caution on the number — the store's search grid shows the Basilisk "From $534.99 USD" while the product page defaults to $2,599.99. That gap is a variant floor rather than a contradiction, but Bells of Steel does not say which option it belongs to, so budget against $2,599.99.

Sunday, September 6, 2026

2 months ago
GFT100 Functional Trainer
DelayBody-Solid

Body-Solid's GFT100 functional trainer is out of stock two weeks after going on sale

The GFT100 product page still shows $2,895.00, but the stock line now reads "Temporarily out of stock" and the Add to Cart button is disabled, so it cannot be ordered today. No restock date and no lead-time estimate appear anywhere on the page. Body-Solid's larger GSFR100 all-in-one, which pairs a Smith machine with dual 210-lb stacks, is unaffected and still shows "In Stock" at $5,500.00. If the GFT100 was your budget pick against a Force USA or REP cable tower, there is currently no way to place the order and no date to plan around.

Altitude Power Rack Ecosystem
Price changeREP

REP's standalone Altitude Smith attachment now lists at $699.99, while the rack itself is back to full price

REP's Altitude Smith Machine Rack Attachment page shows a flat "Regular price $699.99" with no sale markup and no crossed-out figure. We recorded it on August 24 as starting at $949.99, so either the price came down or the cheaper configuration is now the only one listed — REP's page no longer shows a "from" price, so we cannot tell which from the page alone. Moving the other way, the Altitude Power Rack itself now reads "Starting at Regular price $899.99" and the $764.99 we had recorded no longer appears anywhere, meaning the base rack's discount has ended and it is back at its unchanged list price. Both still ship in 24-48 hours. A rack-plus-Smith build that penciled at roughly $1,715 in August is about $1,600 today, but the split between the two line items has changed enough to be worth re-pricing before you order.

Saturday, September 5, 2026

2 months ago
FTR and Tandem Tower
DelayForce USA

Force USA's FTR and Tandem Tower are sold out on preorder, and the Tandem Tower is now retail-only

Both machines still list at their existing prices — FTR $3,399, Tandem Tower $2,499 — but neither can be bought for immediate delivery. Each product page now carries the same wording Force USA has been running on the C20 since August: "Now Available For Preorder! Due to overwhelming demand, we are currently sold out." No ship date is given on either page. The Tandem Tower adds a second restriction that the FTR does not have — "This product is only available in retail locations" — so buying it direct from the site is not an option at all, preorder or otherwise. That makes four Force USA products we track (C20, FTR, Tandem Tower, MyBench FID) sitting behind the same sold-out preorder banner at the same time.

DelayIronmaster

Ironmaster's IM3000 and Super Bench PRO V2 are both waitlist-only

Neither product page has an Add to Cart button today. The $4,199.00 IM3000 Valhalla all-in-one and the $449.00 Super Bench PRO V2 both show "Notify Me When Back In Stock!" in its place, with no restock date and no lead-time estimate given on either page. Listed prices are unchanged. Ironmaster is running an End of Summer promotion — 15% off dumbbells and benches with code EOS through September 7 — but it is a checkout code, not a marked-down price, and neither of these two SKUs can be added to a cart to use it. If you were planning around either machine, plan around a wait of unknown length.

Thursday, September 3, 2026

2 months ago
Gym Monster 2
Price changeSpeediance

Speediance's Gym Monster 2 rises $192 to $3,464

The Gym Monster 2 now shows $3,464.00 against a $3,849.00 regular price on Speediance's own product page, up from the $3,272.00 that same page carried on August 19. The base package also displayed "Sold Out" when checked on September 3, while a machine-readable feed on the same domain still reported it available — so treat stock as unconfirmed in either direction until the page settles. Shipping guidance is unchanged: "Typically, customers in the US can expect to receive their order within 7-10 days." If you were weighing the Gym Monster 2 against a cabled functional trainer, the price gap just widened by $192.

Wednesday, September 2, 2026

2 months ago
Price changeMikolo

Mikolo drops the preorder on its BB02 curl bar and lists it at $109.99

Mikolo had the 4 ft EZ Curl Barbell BB02 on a preorder window running from late August into mid-September. As of September 2 it is a plain priced listing at $109.99 with no preorder, deposit or ship-date language left on it. The listing describes it as fitting Mikolo L1-L4 machines, so confirm that against your own rack before treating it as a general-purpose curl bar. The companion PT00 storage tree, whose early-September window has now opened, still shows no price.

Price change

Six HomeGymCon machines now carry retail prices — four of them still cannot be bought

A price check across six manufacturer sites turned up live retail listings for machines that had only show-floor announcements until now: the Bells of Steel Pandemonium Squat at $1,749.99, the ATX Power Smith Rack PSR-780 at $3,799, the PRx Profile PRO Ark at $3,699.99, the Temple of Gainz Quadsend leg press and hack squat at $4,199.99, the WM Fabrication Quadfather leg extension at $4,300, and the Q-ROPE at $630. Four of those are list prices rather than buyable ones. The Pandemonium, the PSR-780 and the Profile PRO Ark all read sold out or unavailable, and the Quadfather is reserve-and-quote with a 50 percent deposit and a roughly 8 to 12 week lead time. Only the Quadsend, showing a single unit in stock, and the Q-ROPE could be bought outright on the day of the check. None of the six brands published a launch date, so read these as verified on September 2, not as releases that happened that day.

Wednesday, August 26, 2026

2 months ago
Multifly
CoverageDialed Motion

Garage Gym Reviews gets hands-on with Dialed Motion's Multifly prototype

Cooper Mitchell of Garage Gym Reviews called the Multifly the standout product at Home Gym Con for the second straight year and put it through pec-fly, rear-delt, multi-hip and forearm/wrist patterns on camera. Dialed Motion's founders confirmed the head unit runs about 35 lb, folds flat via a magnetic-hinge backpad for storage, and mounts to any standard 3x3-in upright rather than a proprietary bench. They would not commit to self-manufacturing versus partnering with a brand like REP, guessed a price "right around" $1,000 (possibly split into attachment packages), and targeted a release around late 2027. Coop noted the parallel to Dialed Motion's REP-partnered Leg Developer, where he and others felt the shipped version regressed from the original prototype.

Monday, August 24, 2026

3 months ago
GSFR100 Smith / Trainer / Rack
DropBody-Solid

Body-Solid's GSFR100 goes live at $5,500 — the first real price against the Force USA C20

The GSFR100 combo Smith machine, dual functional trainer and rack has a live official product page for the first time since its July 2026 blog teaser, priced at $5,500.

That undercuts the Force USA C20's $6,499 preorder price by nearly $1,000 for a comparable dual-stack, Smith-plus-cable all-in-one footprint.

Body-Solid's page confirms the previously-announced specs: dual 210 lb stacks at 2:1, 600 lb Smith bar capacity and an In-Home Lifetime Warranty.

P9 3D Smith Machine
DropRitFit

RitFit's P9 3D Smith Machine goes live at $2,099.99

The P9 3D Smith Machine — a HomeGymCon show name that had been absent from RitFit's own site since it was first flagged in August — is now live on ritfitsports.com at $2,099.99 (reg. $2,399.99), shipping in 2-3 days.

It's a dual 99 lb-stack, 2x2-in frame all-in-one with both 1:1 and 2:1 cable ratios, positioned as a lower-cost entry into the 3D-Smith category below RitFit's own M3 Pro.

This resolves one of the three long-open RitFit naming mismatches; 'Mega Multi-Functional Smith Machine' and 'Seal 2-in-1 Linear Row' remain absent from the site.

Hybrid Rower
DropChisel Fit

Chisel Fit's Hybrid Rower opens preorder at $1,995

Chisel Fit's Hybrid Rower — a HomeGymCon prototype that shipped with no published specs — now has an official product page with a name ("Dynamic Angle Motion" rower), a full feature list and open preorder pricing: $1,995 with a $500 deposit, regular price $2,995. This is the first price and confirmed detail on the machine since its HomeGymCon debut.

Sunday, August 23, 2026

3 months ago
GFT100 Functional Trainer
Price changeBody-Solid

Body-Solid's GFT100 Functional Trainer gets a live page and a $2,895 price

The GFT100, which Body-Solid teased on its blog on August 17 with no page or price, is now live on its official site at bodysolid.com/body-solid-functional-trainer for $2,895.00.

This resolves a watchlist item we've tracked since the blog announcement. Body-Solid's still-unreleased GSFR100 rack/Smith combo remains blog-only with no product page or price.